Lambaghini

Lambaghini

Lambaghini Sheep Trough

The Conron Lambaghini is our 100lt Concrete Sheep Feedlot Trough.

Like all our Troughs, the Lambaghini is poured as one piece including the pedestals.

The Lambaghini is up off the ground to allow wind and dust to blow under the trough, rather than up the walls and into the trough, keeping the water cleaner for longer.

The Lambaghini fits into your busy schedule by being very quick to clean by featuring a built-in sweep out at the end of the trough. You can leave the water flowing into the trough and sweep out up over the end to clean it.

It also has a built in Sump at the Outlet end with a removable stainless-steel basket to catch grain, straw and dirt that enters the trough.

It is fitted with a 2-inch threaded outlet for quick emptying and easy connection point for continuous flow systems.

Enclosed float area with a 1-inch Brass inlet for easy connection and features our heavy-duty chequer plate lid for float protection.

We have also deigned a purpose made Trough Broom for ease of Cleaning.

The Lambaghini can also be set up to:

  • Have a continuous Flow System
  • Reticulated within the trough
  • Set float to full and use as a sweep out trough.

Most importantly, being a concrete trough, the water is kept cooler for longer.
Cool water encourages lambs to drink more which in turn improves feed conversions and reduces algae growth.

Dimensions: Overall Length 3300mm (9ft drinking space)
Height: 480mm
Width:400mm
Drinking Depth: 250mm
Capacity:100lt
Weight: 556kg

Get a Quote



Features

  • 75mm thick walls and a 100mm base of synthetic fibre, steel reinforced 45 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 1” brass inlet
  • Smooth finish to prevent water permeation
  • Sweep through access between the float and drinking areas
  • Sturdy but lightweight galvanized chequer plate lid is easy to lift and gives you plenty of room to access float valve
  • Tapered centre drainage, with sweep through, sump and strainer basket
  • Troughs are poured as one piece making them sturdy and stockproof

Lamblot

Sheep Feed Bunk

The Lamblot Feed Bunk is ideal for feeding sheep and lambs in the paddock, Containment Lots, Drought Lot or Feedlots you name it!

Easy to fill with your feed wagon. Holding approx. .35m3 of feed

Supplied with built in Ferrell’s to easily join bunks together with our galvanised plates for continuous troughing and fence uprights

Dimensions: 3000mm long x 500mm wide
Back Wall Height: 520mm
Front Wall Height: 320mm
Capacity: .35m3
Weight: 808kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Trough Broom

 

For an even better clean, we have introduced the Conron Trough Broom.
Trough Broom

Custom profile brush head designed to suit our trough profile, they feature a double layer brush and super strong aluminium handle. A must have for any trough owner.

Get a Quote

Float Valves

Our heavy-duty float valves feature a solid brass arm and stainless-steel seat.
High / Low Pressure Heavy Duty Brass Float Valves

1 ½” X 9” ball float2” x 9” ball float
Hansen MaxFlo (including Reducing Bush)
Hansen SupaFlo (including Reducing Bush)

Get a Quote

Trough Pad

The ultimate convenience.

Our Trough Pad enables you to have a complete set up installed without any extra labour or material costs.

Our Precast Trough Pad is placed onto your prepared level, then your trough can be placed into position over the purpose-built recess and plumbing area.

Our Pads are great to go under our 8ft troughs in either the paddock or containment areas or use 2 Pads to accommodate a 16ft trough.

Dimensions: 3300mm long, 2400mm wide, 80mm thick
Weight: 1490kg

Get a Quote

Mini

The Little Guy

Perfect for Man’s Best Friend, or chooks, ducks, horses, pigs you name it!

The Mini includes our unique ‘Mini’ float valve.

Dimensions: 650mm long, 450mm wide, 200mm high
Capacity: 22 litres
Weight: 75kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Beef Bunk

The ultimate in open feed bunks.
Will hold approximately 1m3 of feed.

Dimensions: 3000mm long x 800mm wide,
Back height 700mm, Front height 500mm
Weight: 1300kg

Come with built in Ferrell’s to easily join together with gal plates. Air gap below bunk area to prevent ground moisture spoiling feed , they offer a versatile and cost effective solution for Feedlots, Containment or Drought lots.

Get a Quote



Tubby 2100L

Tubby by name, Tubby by nature

The Tubby is our Octagonal or ‘round’ trough.

The Tubby comes with all the features of our other troughs and holds a massive 2100 litres.

Poured as one piece including the float cover you know the Tubby will withstand large mobs of cattle.

Dimensions: 2450mm diameter and 600mm high
Capacity: 2100 Litres
Weight: 2200kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

16ft Combo

 

Double Ended Sheep and Cattle Trough

Save time and money. Our Combo troughs give producers the flexibility of being able to water 2 paddocks from the one water source.

The 16ft Combo gives you 8 foot of drinking space on each side of the float box.

Like all our troughs, you can sweep straight through the float box and the tapered base makes trough cleaning a breeze.

Suitable for both sheep and cattle.

Sweep straight through the float box in both directions, with a tapered base falling away to either end of the trough for easy draining and cleaning.

 

Dimensions: 5200mm long, 800mm wide and 390mm high
Drinking area: 8ft either side of the float box
Capacity: 1020 Litres
Weight: 1800kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

10ft Combo

10FT COMBO – DOUBLE ENDED SHEEP AND CATTLE TROUGH

One pipe. One float. Two paddocks? No worries! Our Combo troughs give producers the flexibility of being able to water 2 paddocks from the one water source.

The 10ft Combo gives you 5 foot of drinking space on each side of the float box.

Like all our troughs, you can sweep straight through the float box and the tapered base makes trough cleaning a breeze.

Suitable for both sheep and cattle.

 

Dimensions: 3300mm long, 800mm wide and 390mm high

Drinking area: 5ft either side of the float box
Capacity: 645 Litres
Weight: 1200kg

Get a Quote



Features, standard across the range

  • 75mm thick walls and a 100mm base of synthetic fibre
  • Steel reinforced 40 mpa concrete, to maximise the lifespan of your trough
  • Large float area with 2” brass inlet, large enough to accommodate any type of float you wish to install (rigid arm or cord)
  • Smooth finish to prevent water permeation
  • Sturdy but lightweight 5mm galvanized chequerplate lid is easy to lift and gives you plenty of room to access float valve
  • Sweep through access between the float and drinking areas
  • Tapered centre drainage, level with the 4” outlet
  • Troughs are poured as one piece making them sturdy and stockproof

Block

Enter Block content here...


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Etiam pharetra, tellus sit amet congue vulputate, nisi erat iaculis nibh, vitae feugiat sapien ante eget mauris.

VIEW OUR DealersContact Us